The tutorial that I am going to post today is for Myphone Agua Rio Lite. Use only the firmware for MyPhone Agua Rio Lite. I already tried this firmware. Just load the file and flash your phone. No need to change anything.
You can fix the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead phone but it is detected in computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. And other issues with your phones firmware
"DOWNLOAD THESE FILES"
-------------------
-------------------
Firmware Here -->MyPhone Agua Rio Lite Part 1
Firmware Here -->MyPhone
Agua Rio Lite Part 2
Firmware Here --> MyPhone Agua Rio Lite Part 1 Mirror Devhost
Firmware Here --> MyPhone Agua Rio Lite Part 2 Mirror Devhost
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller
Firmware Here --> MyPhone Agua Rio Lite Part 1 Mirror Devhost
Firmware Here --> MyPhone Agua Rio Lite Part 2 Mirror Devhost
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller
"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder" See picture below"
"If you encounter error in flashtool, use different version of it."
"I
suggest to use 32bit Windows OS for compatibility of the driver"
Installing Driver with AutoInstaller
First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer.
Follow these steps:
- Turn off your phone (always powered off is a must)
- Press and hold volume up or down, or you can simple press the two button
- Insert your USB cable without releasing the VOLUME button(s).
- In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
- Repeat 1 to 4 if it does not detect your phone.
- If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^
Reference Video using Driver Auto Installer (watch in HD)
When installing it manually your phone must be
turned off, then connect it to your computer/laptop while pressing VOLUME UP or
VOLUME DOWN. This will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver.
2. Check include this location ... ... and click on
browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using
Windows XP or Win7 for Windows 7 and then press OK when you are done picking
the right folder for the driver.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Video Installing VCOM Driver (please watch in HD)
"Your
Phone must be turned off when you are ready to connect and flash your
phone"
Flashing
1. Launch FlashTool
2. In Flashtool, Click on Scatter-Loading, and load
your scatter file. (see example below)
Reference Video Using FlashTool version 5.xxx (watch in HD)
3. After you load the file, press Press Download to Flash your Phone.
4. After you press Download Follow these steps
- Turn off your phone (always powered off is a must)
- Press and HOLD volume UP or Down or you can simply press it simultaneously
- Insert your USB cable without releasing the VOLUME button(s).
- Keep on repeating until Flashtool detected your phone.
5. If successfully detected just wait until the progress bar reaches
100%. If your phone did not automatically turn on after flashing, remove
battery and USB cable. And put back your battery then turn on your device.
"Hard
reset your phone after flashing"
Some workarounds:
If you encounter PMT_Changed error here is what you
do:
In Latest version of Flashtool
- Load the scatter file
- Choose Format all + Download (Underneath Scatter-loading file)
- Then Click Download and wait until it is done flashing
For Invalid IMEI:Your Phone/Tablet must be rooted
first
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
Restore yong IMEI in MTKDroidTools version 2.5.3. You will have this error when you format your phone in Flashtool as I had experienced. To restore download MTKDroidTools version 2.5.3 After you extract the file. Open the green robot, you must enable the usb debugging in your phone. It is usually located in Settings>Devoloper Mode then look for usb debugging. After enabling it. Connect your phone in your computer then in MTKDroidTool click on ROOT. Wait for it to finish, then Click in IMEI/NVRAM, input 15 number in each box. Then click REPLACE. Then click Reboot or you can manually turn off your phone. Then turn your phone on again. You can see that you have fully restored your IMEI.
I hope this tutorial help you. Please drop a comment if something is not clear to you.
You can fix the following issue in your phone:
Thanks for this :)
ReplyDeleteyou are all welcome...please share my site
ReplyDelete~*~ Vids Wall ~*~
ReplyDeleteVids Wall | It's All About the Collection of Fun and Entertainment Videos From YouTube And DailyMotion Sites.
Visit...
http://VidsWall.blogspot.com/
Ty
ReplyDeleteI Love your article. You cant visit my website : cyberflix tv apk download
ReplyDeleteJust love your article.I do invariably look over your web site for brand new articles.I am recently performing on associate app solitaire apk
ReplyDeletethats going awing and special because of you
Have you tried this new app Wheel Smash Mod Apk : this is really great.
ReplyDelete